PCA 400 Parts & Accessories

PCA 400 12 in. Probe & Handle Assembly

PCA 400 24 in. Probe & Handle Assembly

PCA 400 36 in. Probe & Handle Assembly

PCA 400 Buna N Sample line with water trap, 7.5

PCA 400 Buna N Sample line with water trap, 15 ft.

PCA 400 Viton sample line with water trap 7.5 ft.

PCA 400 Viton sample line with water trap 15 ft.

Wireless printer (IrDA + Bluetooth)

PCA 400 AC Adapter

USB Cable

0024-1652 Oxygen (O2) sensor by Bacharach

The O2 sensor is used in Bacharach portable combustion analyzers to measure the percentage content of oxygen levels in flue gases. The range of the oxygen sensor is 0 – 20.9%. O2 measurement is used in conjunction with the chosen fuel to calculate the CO2 levels in flue gases. Bacharach portable combustion analyzers only calculate CO2 when oxygen levels are below 16%. Bacharach uses O2 and other readings in determining efficiency rather than CO2 for a more accurate measurement. Measuring oxygen content in the excess air lets you know if you have too much air or too much fuel, allowing you to tune your furnace or boiler to maximum efficiency. Measuring O2 directly can save fuel, and save time during a combustion tune-up test.

• Measures percentage content of oxygen levels in flue gas
• Provides more accurate efficiency readings
• Saves time during tune-ups, telling you if air or fuel is too high
• Available in two year, three year, and five year sensor life depending on instrument

CO Sensor (B-Smart pre-calibrated sensor) - PCA 400

CO Sensor (not calibrated)

SO2 sensor (not calibrated)

NO2 sensor (not calibrated)

NO sensor (B-Smart pre-calibrated sensor) - PCA 400

NO sensor (not calibrated)

(DOT) Calibration Gas Cylinder, 500 ppm CO, Balance Air, 103L

(DOT) Calibration Gas Cylinder, 1000 ppm CO, 1000 ppm H2, N2, 103L

Calibration Gas - 100 ppm NO in N2

(DOT) Calibration Gas Cylinder, 100 ppm NO, Balance N2, 58L

(DOT) Calibration Gas Cylinder, 100 ppm SO2, Balance N2, 58L

Small Pressure Plug Kit

Differential Pressure Kit

CO sensor high range (B-Smart pre-calibrated sensor) - PCA 400, PCA 3

SO2 sensor (B-Smart pre-calibrated sensor) - PCA 400, PCA 3

NO2 sensor (B-Smart pre-calibrated sensor) - PCA 400, PCA 3

High temperature sintered filter (fits on end of probe)

Differential Pressure & Temperature Kit

Probe filters (fits inside water trap, package of 3)

Water trap/filter assembly (for probe hose assembly)

Wireless printer (IrDa)