ALL-TEST Pro 31 Handheld Motor Testing Kit with 115V Charger Adapter - 50001

50001 ALL-TEST Pro 31 Handheld Motor Testing Kit with 115V Charger Adapter

The hand-held ALL-TEST PRO® 31 (AT31) is an excellent trouble-shooting tool that will test a wide variety of motors and transformers. The AT31 will find winding faults such as turn to turn and coil to coil, along with grounded windings. The rotor test helps you detect rotor problems such as broken rotor bars and eccentricity.

The AT31 will measure impedance (Z), phase angle (Fi), current/frequency response (I/F), insulation to ground resistance (500V or 1000V and measure to 500 meg-ohm), will perform a quick pass/fail rotor test (by turning the motor shaft), and will measure EMI.

Measurement results can be entered into our optional Condition Calculator (CC) software. The CC software will perform an unbalance calculation and report back on the condition of the winding, plus will allow the results to be stored and printed. However, Condition Calculator software does not perform data trending.

AT31 testing range is dependent upon motor, transformer, or generator design, but the AT31 has successfully tested AC motors of hundreds of horsepower in size.

Features

• Trouble Shooting – Know in a few minutes what the problem is: electrical or mechanical, coil or rotor, internal fault or ground fault.
• Start-up – Make sure all electrical motors are working in top condition.
• Quality Assurance – Test all new/repaired and stored spare motors.
• Light PdM – Also suited for limited, manual, Predictive Maintenance.

Includes

• ALL-TEST PRO® 31
• Protective Glove
• Test Harness with Clips
• Battery Charger
• Carrying Pouch for belt and shoulder
• User Manual on CD

Specifications

• Size: 7.5" L, 4" W, 1" D
• Weight: 1.0 lb.
• Batteries: 6 pack, 7.2V – 1000mAh