MSA TG5000 Gas Monitor

Item #:

A-TG5000-A-1-16-0-00-0-2-2-0

Brand:

MSA

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

TG5000 Gas Monitor by MSA

Applications

Industrial facilities possess a wide variety of gas detection needs. From boiler rooms, battery rooms, engineering and research labs, and transportation maintenance facilities, to a myriad of other industrial building and facility applications, each environment has its own monitoring needs. To enable personnel to work safely in these environments, monitoring of toxic gases, oxygen enrichment and deficiency, and combustible gases is necessary. Due to this wide variety, a flexible, versatile gas monitor is absolutely essential.

Solution

The TG5000 Monitoring System is an effective and economical solution to detecting combustible and toxic gases, as well as oxygen deficiency/enrichment. This self-contained package featuring audiblevisible signaling is particularly well-suited to notify workers of an emergency condition to prompt evacuation protocols as quickly and safely as possible. The dual sensing design enables users to double the sensing power with half the footprint of a single gas sensor transmitter, and the remote sensing capability permits strategic sensor positioning for optimal facility safety.

Additional Features

Operates in diffusion mode, with factory-calibrated sensors ready to perform immediately after installation
Available for remote sensing applications, where installation requires the sensor to be separated from the electronics
Can operate on a completely stand-alone basis with its large LCD display, quick-check LEDs and three relay outputs (two alarm and one fault), or can be connected with a 4-20 mA output to a control system (PLC, DCS, etc.)
SafeSwap enables safe and quick replacement of XCell Gas Sensors without turning off the instrument
Pre-calibrated sensor modules are ready for installation out of the box
Sensors can be replaced in the field without the use of tools—the unit quickly recognizes the new sensor type and reconfigures alarm and relay settings to optimize the new sensor

Stay Connected. Work Smarter.

Bluetooth wireless technology
Check status and get alerts up to 75 ft. (23 m) away
Modify settings/setpoints/alarms
Initiate calibration and view progress

Available Options

Strobes (one or two)
Internal 50 W power supply
Sunshield
Mounting brackets

Specifications

TG5000 Specifications

GAS TYPE	Toxics, oxygen, & combustibles
GAS SAMPLING	Diffusion
OUTPUT TYPE	4-20 mA, HART
SENSOR LOCATION	Local or remote sensor up to 100 m (328 ft.)
RELAYS	6 Amp DPDT, 2 relays
HOUSING MATERIAL	General-purpose polycarbonate enclosure
TEMPERATURE RANGE	-20°C to +40°C
POWER INPUT	Internal 110VAC/24VDC power supply
ALARM TYPE	Piezo horn (95 dB) with horn silence button
WARRANTY	2 years

Sensor Specifications

SENSOR TEMPERATURE RANGE	(May differ by gas, see manual)
XCELL	-40°C to +60°C (-40°F to 140°F)
XIR PLUS	-40°C to +60°C (-40°F to 140°F)
SENSOR PERFORMANCE*	T90 (typical)	Repeatability	Zero Drift (per year)
XIR PLUS COMB.	< 2 sec.	< ± 1% LEL	N/A
XIR PLUS CO2	<6 sec.	< ± 1% Vol	N/A
XCELL COMB.	<22 sec.	< ± 3% LEL	< 5% LEL
XCELL CO	< 9 sec.	< ± 1%	< 1% full scale
XCELL Cl2	< 12 sec.	± 1%	≤ 1% FS per mo.
XCELL ClO2	< 30 sec.	< ± 15%	< 1% FS per mo.
ETO	< 140 sec.	< ± 15%	< 2% FS per mo.
HCl	< 120 sec.	< ± 35%	< 1% FS per mo.
HCN	< 30 sec.	< ± 15%	< 1% FS per mo.
HF	< 90 sec.	< ± 15%	< 2% FS per mo.
H2	< 185 sec.	< ± 10%	< 1% FS per mo.
XCELL H2S	< 23 sec.	< ± 1%	< 1% full scale
XCELL NH3	< 280 sec.	± 1%	≤ 1% FS per mo.
NO2	< 60 sec.	< ± 10%	< 1% FS per mo.
XCELL O2	< 11 sec.	< ± 1% Vol	< 0.2% Vol
XCELL SO2	< 6 sec.	± 1%	≤ 1% FS per mo.
SENSOR RELAYS	5 Amp SPDT; 3 relays (2 alarm, 1 fault) @220 VAC or 30 VDC
* Typical response at standard temperature and pressure test conditions

Datasheets & User Manuals

$6,378.00

Write a Review

MSA TG5000 Gas Monitor

Ask an Expert