- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Bacharach 6500-1019 MGS-350 Gas Detector, NO2 (parking garage) STD Housing
Item #:
6500-1019
Brand:
Bacharach
Share this product:
6500-1019 MGS-350 Gas Detector, NO2 (parking garage) STD Housing by Bacharach
Bacharach's MGS-350 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, TVOC and toxic gases. It comes standard with analog and digital outputs including 4-20 mA, 0-5V, 0-10V and Serial Data, allowing them to connect directly to most BMS, SCADA or control systems. An onboard visual LED alarm indicator alerts area personnel when levels have exceeded the desired limit. The MGS-350 also features alarm relays (high and low) for connection to external audible/visual alarms or a BMS or BAS system.
MGS-350 Gas Transmitters, combined with the MGS Controller, can provide facility owners with a customized and complete low-cost gas-detection system. A variety of housing options are available (shown below), from standard to water resistant enclosures, which allow the MGS-350 units to be placed in many environments.
Features & Benefits:
- Detects refrigerants (CFCs, HFCs, HCFCs), TVOCs, combustible gases/hydrocarbons, O2, NH3, CO, H2S, H2, NO, NO2, SO2, Cl2, and O3
- Long-lasting infrared, semiconductor, catalytic bead and electrochemical sensor options for effective leak detection - at the most affordable cost.
- Precalibrated replacement sensors for easy maintenance
- Integrated visual LED alarm
- Two onboard alarm relays (low and high)
- Multiple housing options available, including IP 66 and duct mount, for placement in diverse environments.
- Analog outputs: 4-20 mA, 0-5V, 0-10V, featuring 12/24 VAC / 12-30VDC operation
Power Supply | 12-24 VAC 50/60 Hz, 12-30 VDC, 5 W maximum |
Power Monitoring | Green LED |
Visual Alarm | Orange LED for low level; Red LED for high level |
Analog Outputs | 0-5 V, 0-10 V, 4-20 mA |
Digital Interface | RS-485 (Modbus) |
Digital Outputs | 2 relays rated 1 A/125 VAC (resistive load) |
Standard Compliance | CE mark UL/CSA/IEC/EN 61010-1 FCC CFR 47 Part 15, Subpart B |
EC Sensors | Formula | Typical Detection Range(s) | |
Ammonia | NH3 | 0-100 ppm, 0-1,000 ppm, 0-5,000 ppm | |
Carbon Monoxide | CO | 0-100 ppm, 0-500 ppm, 0-1,000 ppm | |
Chlorine | Cl2 | 0-20 ppm | |
Chlorine Dioxide | ClO2 | 0-1 ppm | |
Ethylene Oxide | C2H4O | C2H4O 0-20 ppm |
|
Ethylene | C2H4 | 0-20 ppm, 0-1,000 ppm | |
Fluorine | F2 | 0-1 ppm | |
Hydrazine | N2H4 | 0-1 ppm | |
Silane - Hydride | SiH4 | 0-5 ppm | |
Hydrogen | H2 | 0-1,000 ppm, 0-10,000 ppm, 0-100% LEL | |
Hydrogen Chloride | HCl | 0-50 ppm | |
Hydrogen Cyanide | HCN | 0-50 ppm | |
Hydrogen Sulfide | H2S | 0-30 ppm, 0-200 ppm | |
Nitric Oxide | NO | 0-10 ppm, 0-500 ppm | |
Nitrogen Dioxide | NO2 | 0-50 ppm | |
Oxygen | O2 | 0-30% | |
Ozone | O3 | 0-2 ppm | |
Phosgene | COCl2 | 0-1 ppm | |
Phosphine | PH3 | 0-5 ppm | |
Sulfur Dioxide | SO2 | 0-100 ppm | |
IR Sensors | Formula | Typical Detection Range(s) | |
Carbon Dioxide | CO2 | Standard range | 0-10,000, 0-1% volume |
Special request | 0-5,000ppm, 0-2%, 0-5%, 0-10% | ||
Combustible Gases | Selected | 0-100% LEL, 0-100% volume | |
CAT Sensors | Formula | Typical Detection Range(s) | |
All Combustible Gasses | Selected | 0-100% LEL | |
SC Sensors | Example Gases | Typical Detection Range(s) | |
HFCs | R134a, R404A, R407C, R410A, R507 | 10-10,000 ppm | |
HCFCs | R22 | 10-10,000 ppm | |
CFCs | R11, R12 | 10-10,000 ppm | |
Combustibles | Methane (Natural gas), Propane, Butane, LPG, Isobutane, Ethylene | 0-10,000 ppm | |
Ammonia | NH3 | 0-10,000 ppm | |
Hydrogen | H2 | 0-10,000 ppm | |
VOCs | Acetone, Chloroform, Ethanol, Methanol, Methyl and Methylene Chloride, Ethyl and Ethylene Chloride | 0-10,000 ppm |
Housings | Dimensions | Weight |
Standard | 145 x 185 x 80 mm 5.7 x 7.3 x 3.1 in |
850 g 1.9 lb |
IP66 with Digital Display | 175 x 165 x 82 mm 6.9 x 6.5 x 3.2 in |
719 g 1.6 lb |
IP66 | 175 x 165 x 82 mm 6.9 x 6.5 x 3.2 in |
660 g 1.5 lb |
IP66 with Splash Guard | 175 x 225 x 82 mm 6.9 x 8.9 x 3.2 in |
756 g 1.7 lb |
Splash Guard with M42 Thread | 75mm x 50 mm 3.0 x 2.0 in |
72 g 0.2 lb |
IP66 with Remote Sensor Head | 175 x 155 x 82 mm 6.9 x 6.1 x 3.2 in |
917 g 2.0 lb |
Exd | 130 x 175 x 90 mm 5.1 x 6.9 x 3.5 in |
4003 g 8.8 lb |
Exd + Digital Display | 140 x 180 x 130 mm 5.5 x 7.1 x 5.1 in |
2322 g 5.1 lb |
IP66 with Exd Remote Sensor Head | 175 x 155 x 82 mm 6.9 x 6.1 x 3.2 in |
1240 g 2.7 lb |
IP66 with PRV Remote Sensor Head | 175 x 155 x 82 mm 6.9 x 6.1 x 3.2 in |
900 g 2.0 lb |
IP66 Airflow/Duct Mount | 175 x 125 x 82 mm 6.9 x 4.9 x 3.2 in |
643 g 1.4 lb |
Remote Face Plate | 86 x 86 mm 3.4 x 3.4 in |
86 g 0.2 lb |