- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco Conductivity Analyzer Graphic Display, 3-Relays, IP-65, RS-485 - 6308CT
Item #:
6308CT
Brand:
Jenco
Share this product:
6308CT Conductivity Analyzer Graphic Display, 3-Relays, IP-65, RS-485 by Jenco
Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
- Bumpless calibration
- CE approved
- RS-485 output
- Programmable relays for conductivity
- Reversible and isolated 4 to 20ma output
- Programmable relay for temperature
- Conductivity/temp.measurement & control
- Simultaneous analysis and display for measurement and controls
- User programmable reference temperature temperature coefficient
- Selectable 2-wire or 4-wire cells for long cable length & wide measurement range
Range | Cond.: 0 uS to 5.0 mS TDS: 0 ppm to 150.0 ppt Temp.: -10.0 to 120°C |
Resolution | Cond.: 0.01 uS to 0.1 mS TDS: 0.01 ppm to 0.1 ppt Temp.: 0.1 °C |
Accuracy | Cond.: 0.5% ± 1 LSD TDS: 0.5 % ± 1 LSD Temp.: ± 0.1 °C |
Conductivity | |
Reference temperature | 1.5 °C to 25.0 °C |
Temperature coefficient | 0.0 % to 40.0% |
Basic cell constant | 0.01,1 and 10.0 |
Cell constant range | ±30% of basic cell constant |
Output Relays |
|
Output relays numbers | Two programmable high or low relays for conductivity |
Control type | On/off |
Relay output (resistive load only) | 5amps at 115 VAC, 2.5 amps at 230 VAC |
Relay set point hysteresis | User programmable |
Current Output |
|
Current output | Isolated 4 to 20 mA |
Range | Selectable zero, & span |
Accuracy | ±0.02mA |
Isolated voltage | 500 VDC |
Maximum load | 500 ohms |
General |
|
ATC sensor | Thermistor 10kiloohms at 25 °C |
Security protection | 4digit password |
Keypad | Audio feedback |
Communication | RS-485 |
Display | Graphic LCD w/backlight |
Power source | 115/230 VAC, 50/60hz |
Dimensions | 1/4 DIN, depth 148 mm |
Weight | 950 gm |