- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco Digital pH/mV/Ion/Temp Meter with Dual Display - 6219
Item #:
6219
Brand:
Jenco
Share this product:
6219 Digital pH/mV/Ion/Temp Meter with Dual Display by Jenco
- Two LCD display pH, mV, direct ion concentration and temperature.
- Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
- User selectable resolution of up to 0.001 for greatest accuracy.
- Direct read out in ion concentration to simplify ion measurements.
- RS-232 computer interface with software.
- AC adaptor or battery power (low battery indicator).
Range | pH: -2.000 to 16.000 pH ORP: -1999.9 to 1999.9mV lon: 0.0 to 119.8conc Temp: -5.0 to 125.0 °C |
Resolution | pH: 0.01pH/0.001pH ORP: 1 mV/0.1mV lon: 0.05,0.1 or 0.2conc Temp: 0.1 °C |
Accuracy | pH: ± 0.01 %±1 digit ORP: ± 0.01 %±1 digit lon: ±2 digit Temp: ± 0.5 °C |
pH buffer recognition | US(4.01,7.00,10.01) or NIST(4.00,6.86,9.18) factory set |
pH Electrode Offset Recognition | ± 90mV at pH 7.00 or 6.86 |
pH Electrode slope recognition | ±30% at pH 4.00 , 4.01, 9.18 or 10.01 |
pH Temp Compensaton | Auto /manual -5.0 to 125.0 °C |
Input impedance | >10(exp)13 ohms |
Output / Connector | RS232 /BNC and 8 PIN |
Power | 6 x 1.5 Volt AA batteries or 115 / 230V AC adapter |
Operating Temperature Conditions | From 0 to 50°C , at 85% RH |
Weight/Dimensions | 1070 grams(Icluding batteries) / 250mm x 240mm x 100mm |