- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco 1/4 DIN Panel Mount pH/ORP Controller/Transmitter Kit - 3675KA
Item #:
3675KA
Brand:
Jenco
Share this product:
3675KA 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco
1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large LCD. Connectors are a BNC and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power 115/230V AC.
- Isolated 4 to 20 mA output
- Dual on/off relays
- Large LCD display
- ATC
- 115VAC /230VAC operations
- Compact 1/4 DIN case
- Low power solid state design
- Front panel output current span adjustable control
- Front panel acid/base influent select switch
- Front panel high/low relay format select switch
Range | pH: 0 to 14.00 ORP: -1999 to 1999 mV |
Resolution | pH: 0.01 ORP: 1 |
Accuracy | pH: ± 0.01 ORP: ± 0.1% |
Current output pH/ORP | 0.00~14.00ph / -1400 ~ 1400 mV 0.00~14.00ph / -1999 ~ 1999 mV |
Relays output (max.) | 5amp. at 115VAC, 2.5 amp. at 230 VAC,resistive low |
Relay hysteresis pH/ORP | ±0.1ph/±10 mV |
Isolated 4~20mA output range | Over imput span |
Isolation voltage | 500VDC max. |
Load resistance | 500 ohm max. |
Input impedance | Greater than 10exp(12) ohms |
Temperature compensation | Auto 0 to 100°C |
Readout | 12.7 mm high LCD |
Operating temperature | 0 to 40 °C |
Power source | 115/230 VAC ±15%,50/60hz |
Dimensions | 96mm x 96mm x 119.3mm |
Weight | 0.77 kg |