- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco Handheld Cond/TDS/Sal/Temp Meter Kit - 3010M+107A
Item #:
3010M-107A
Brand:
Jenco
Share this product:
3010M+107A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco
Includes:
- 3010M Handheld Cond/TDS/Sal/Temp Meter
- 107A Two-wire conductivity cell with 4 PIN connector, K=10.0 (1.0~200.0mS/cm).
- Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
- 50 data set reviewable memory.
- Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
- Selectable cell constants for true wide range readings.
- Adjustable TDS coefficient, reference temperature and temperature coefficient.
- Uses one conductivity cell for conductivity, salinity and TDS measurements.
- Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
- Automatic shutoff function (30 minutes of non-use).
- Battery life over 1000 hours.
- IP65 waterproof.
- Low battery indicator.
- RoHS and CE compliant.
Range | Conductivity: 0.000 to 9.999uS/cm; 100.0 to 400.0uS/cm; 0.00 to 99.99uS/cm; 100.00 to 999.9uS/cm; 1000 to 9999uS/cm; 10.00 to 40.00mS/cm; 0.0 to 999.9uS/cm; 1000 to 9999uS/cm; 10.00 to 99.99uS/cm; 100.0 to 400.0mS/cm; 10.0 to 99.99uS/cm Salinity: 0.0 to 70.0 ppt Temp.: -10.0 to 90.0 °C |
Resolution | Conductivity: 0.001 uS/cm ,0.01uS/cm, 0.1uS/ccm,0.01mS/cm Salinity: 0.1 ppt Temp.: 0.1 °C |
Accuracy | Conductivity: ±0.5 % FS Salinity: ±0.5% FS Temp.: ± 0.2 °C or ±0.4%FS |
Reference temperature | From15.0 to 25 °C,default is 25.0 °C |
Temperature Coefficient | From 0.00 to 4.00%,default is 1.91% |
TDS Constant | From 0.30 to 1.00%,default is 0.65 |
Electrode Type / Cell Constant | Two wire K=0.1, 1.0 , 10 conductivity cells ,default is 1,0 |
ATC |
Thermistor,10k ohm at 25°C |
Power | 9Volt battery |
Operating Ambient Conditions | From 0 to 50°C, at 90% RH |
Weight:/Dimensions(W x D x H) | 260gm,(batteries included)/70mm x 186mm x37mm |