1-866-4 JJSTECH(1-866-455-7832)

Zarbeco CaliWedge for ZDM and other Microscopes Patent Pending One Step Software Calibration - CW-ZDM2

Item #:
ZB-CW-ZDM2
Brand:
Zarbeco
Zarbeco CaliWedge for ZDM and other Microscopes Patent Pending One Step Software Calibration - CW-ZDM2
$450.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Zarbeco CaliWedge for ZDM and other Microscopes Patent Pending One Step Software Calibration - CW-ZDM2

Zarbeco CaliWedge for ZDM and other Microscopes Patent Pending One Step Software Calibration - CW-ZDM2

$450.00

CW-ZDM2 CaliWedge for ZDM and other Microscopes Patent Pending One Step Software Calibration by Zarbeco

The CaliWedge (Patent Pending No. 15/062,663) is the new and easy way to use the included Wedge Reader PC software for one-button calibration on your MiScope and MiScope Megapixel 2.

Calibration, magnification, telecentricity, distortion, field curvature, depth of field and more are easily obtained. With the included advanced interferometry techniques in the Wedge Reader PC software you will get an accurate calibration that is compensated for lens distortion.

First place the object you want to measure under your ZDM or other microscope and focus it using the focus block. Then, place your CaliWedge under your lens, and move it until it is in focus on the center of the CaliWedge lines (without moving the focus again). Then click the wedge button in your Wedge Reader software and your ZDM or other microscope is now calibrated. Now use your ZDM software for measurements of the object you previously focused on using your Video Toolbox PRO or Premier PC software and it is calibrated for accurate measurement. If you are using another microscope and don't have Video Toolbox PRO or Premier software, you can enter the calibration into your microscope's measurement software.

Features

  • Includes CaliWedge matched for your specific microscope or optical system
  • One-button calibration software that integrates with Video Toolbox PRO and Video Toolbox Premier (purchase separately)
  • Wedge Reader PC Software opens all common image formats to analyze optic parameters including magnification, distortion, field curvature and telecentricity.

Computer Requirements

  • Pentium III 500 MHz or faster (Core 2 Duo processor recommended)
  • Windows 2000/XP/VISTA/7/8/10, Internet Explorer 5.0 (or later) installed
  • DirectDraw 8.1+
  • 256+ MB of Free Memory, Video card with 32+ MB of video RAM, minimum 800 x 600 resolution at 16-bit (65,000 colors)

Questions & Answers