- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Oakton CD 650 Portable Waterproof Conductivity / Dissolved Oxygen Meter, with NIST Traceable Certificate of Calibration - WD-35433-03
Item #:
WD-35433-03
Brand:
Oakton Instruments
Share this product:
WD-35433-03 CD 650 Portable Waterproof Conductivity / Dissolved Oxygen Meter, with NIST Traceable Certificate of Calibration by Oakton
Great for salt water testing!
- Durable waterproof and dustproof design with IP67 rating – Even with no probes attached
- Push-button calibration for all parameters – 5 points for conductivity; 3 points for DO
- Large backlit graphic display – Multiline display with electrode status indicator, calibration data, and more
- User-settable “calibration due” alarm – Out-of-date or unperformed calibrations are now things of the past!
- Built-in real-time clock – Time-and-date stamping meets Good Laboratory Practice (GLP) standards
- Store up to 500 data sets – Infrared IrDA wireless technology makes PC downloading convenient and easy
- Set point alarms – Audible warning when readings are outside set points limit
- Research-grade accuracy – Resolution to 0.001 pH and accuracy to ±0.002 pH
- Electrode status indicator – Calibration data provides electrode diagnostic tool
- Password protection – Security for calibration and setup menus
- Rugged rubber boot – Protects meter from impact (optional; included with kit)
Conductivity Range | 0 to 500.0 mS |
TDS Range | 0 to 500 ppt |
Salinity Range | 0 to 80 ppt |
Resistivity Range | 0 to 20.00 MΩ |
DO Range | 0.00 to 90.00 mg/L (ppm), 0.0 to 600.0% |
Temperature Range | –10.0 to 110.0°C (14.0 to 230.0°F), selectable |
Conductivity Resolution | 0.05% full-scale |
Ion Resolution | 2 or 3 digits |
TDS Resolution | 0.05% full-scale |
DO Resolution | 0.01 mg/L (ppm), 0.1% |
Temperature Resolution | 0.1°C (0.1°F) |
Conductivity Accuracy | ±1% full-scale |
Ion Accuracy | ±0.5% full-scale (monovalent); ±1% full-scale (divalent) |
TDS Accuracy | ±1% full-scale |
DO Accuracy | ±0.2 mg/L; ±2% |
Temperature Accuracy | ±0.5°C (±0.9°F) |
Conductivity Calibration | Manual up to 5 points (1 per range); automatic up to 4 points (84.0 μS/cm, 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm) |
DO Calibration | Two points; 100% and 0% |
Temperature Calibration | Offset 0.1°C (0.1°F) increments |
TDS factor | 0.40 to 1.00 |
Cell constant | 0.100 to 10.000 |
DO salinity correction | Range: 0.0 to 50.0 ppt Resolution: 0.1 ppt |
DO pressure correction | Range: 500 to 1499 mm Hg, 66.6 to 199.9 kPa Resolution: 1 mm Hg, 0.1 kPa |
Memory | up to 500 sets with GLP date and time |
Output | infrared, IrDA |
Real-time clock | time-and-date stamp on calibration and stored data |
Temperature normalization | 15 or 30°C |
Temperature coefficient | linear or pure |
Temperature compensation | automatic or manual (selectable), from 0 to 100°C |
Ambient operating temperature | 0 to 50°C (32 to 122°F) |
Power | four 1.5 V AA batteries (included) or optional universal AC adapter, up to 200 hours continuous use |
Dimensions | Meter: 7.50"L x 3.75"W x 2.25"H (19 x 9.5 x 5.7 cm) Boxed: 9.13"L x 9.13"W x 2.75"H (23 x 23 x 7 cm) |
Weight | Meter: 1 lb (0.5 kg) Boxed: 2 lb (0.9 kg) |