- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Sensorex DO1200 Dissolved Oxygen Sensor, PTFE, 12mm Hand Held, 1 meter, BNC - DO1200/T/BNC
Item #:
SEN-DO1200-T-BNC
Brand:
Sensorex
Share this product:
DO1200/T/BNC DO1200 Dissolved Oxygen Sensor, PTFE, 12mm Hand Held, 1 meter, BNC by Sensorex
The DO1200 and DO1200TC feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding HDPE membrane caps for portable or lab use. Optional PTFE membrane caps are available for on-line or heavy UV exposure applications. Fill solution is replaceable when required.
The DO1200 is supplied without internal temperature compensation. The DO1200TC can be supplied with a variety of user defined ATC elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our FC75P 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch FNPT threaded tees.
Features
- Reliable galvanic sensing technology
- Compact 12mm design
- For portable, laboratory or on-line use
- Optional integral ATC element
- Easy to use pre-membraned replacement caps
Range | 0-20 mg/L |
Body Material | Epoxy and Noryl |
Max Temperature | 50 Degrees C |
Saturation Output | HDPE = 47mV +/- 9mV, PTFE = 33mV+/-9mV |
Pressure | 0-100 psig (7.5 Bar) |
Calibration | Single point in air |
Response Time | After Equilibration, HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV |