 |
- To activate the detector, press .
- To deactivate the detector, press and hold until the OFF countdown is complete
- To view the date/time, TWA, STEL, and maximum (MAX) readings, press twice rapidly. To clear the TWA, STEL, and MAX readings, press when the LCD displays CLEAR ALL.
- To initiate calibration, press and hold while the detector performs the OFF countdown. Continue holding while the LCD briefly deactivates and then reactivates to begin the CAL countdown. Release when the CAL countdown is complete.
- To activate the backlight, press and release.
- To acknowledge latched and pump alarms, press .
- To acknowledge a low alarm and disable the audible alarm, press
. The Low Alarm Acknowledge option must be enabled in Fleet Manager II
- To acknowledge any of the Due Today alarms (calibration, bump test, block test) and disable the audible alarm, press .
|
