- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Hanna pH Digital Controller with Matching Pin and PID Control, 230V - PH502421-2
Item #:
PH502421-2
Brand:
Hanna Instruments
Share this product:
PH502421-2 pH Digital Controller with Matching Pin and PID Control, 230V by Hanna Instruments
The pH 502 series of controllers offer many features to increase the level of control available in your plant. These instruments can be configured to utilize P, PI, PID controlling. With this feature, the pH 502 takes the place of three instruments that only allow one configuration each. The pH 502 line includes models that incorporate control through analog output to drive any compatible device, such as an electrovalve or pump. Models equipped with a solid state relay are also available to ensure maximum life of the switching device. Each model has a differential input for a grounding bar to extend electrode life. Several models come with an RS485 port, as well as analog recorder output.
Fail Safe Alarm System protects against power interruption or line failure. 1, 2 or 3 point automatic calibration and manual or Automatic Temperature Compensation complete the features of this controller.
- Single or dual set point
- SSR relay available
- Control through analog output
- PID control
- Fully programmable
- mA and VDC recorder output or RS485
- Differential input for ground loop protection
- Automatic three point calibration
- Last calibration data
- Automatic Temperature Compensation
- Simple wiring with removable terminal modules
Choose your configuration
pH 502421-1 dual setpoint with SSR relay, on/off and PID controls, analog output, 115V
pH 502421-2 dual setpoint with SSR relay, on/off and PID controls, analog output, 230V and PID controls, RS485 output, 230V
Order Information:
Each pH 502 model is supplied complete with mounting brackets and instructions.
pH Range | 0.00 to 14.00 pH |
Temperature Range | -9.9 to 120°C |
pH Resolution | 0.01 pH |
Temperature Resolution | 0.1°C |
pH Accuracy @ 20°C | ±0.02 pH |
Temperature Accuracy @ 20°C | ±0.5°C |
Input Impedance | 1012 Ohm |
pH Calibration | automatic, one, two or three point, at pH 4.01, 7.01, 10.01 |
Temperature Compensation | automatic (with Pt100 probe) or manual from -9.9 to 120°C |
Outputs | digital: RS485 bi-directional opto-isolated; or analog, galvanically isolated: 0-1 mA, 0-20 mA and 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC |
Set Point Relay | 1 or 2 contact outputs SPDT 5A-250 VAC, 5A-30 VDC (resistive load) or 1 or 2 Solid State Relay (SSR), 1A, 250 VAC (resistive and inductive load), fuse protected (2A, 250V fast fuse) |
Alarm Relay | one contact output SPDT, 5A-250 VAC, 5A-30 VDC (resistive load), fuse protected (5A, 250V fuse) |
Power Supply | 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz |
Power Consumption | 15 VA |
Over Current Protection | 400 mA 250V fast fuse |
Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing |
Dimensions | panel cutout: 140 x 140 mm, instrument: 144 x 144 x 170 mm |
Weight | 1.6 kg (3.5 lb.) |