1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Safety Information - Read First

Safety Information - Read First


Safety Information - Read First

Use the base station only as specified in this manual.
International symbols on the base station and in this manual are explained in Table 1.
Read the Caution statements on the following pages before using the base station.

Caution

This instrument contains batteries. Do not mix with the solid waste stream. Spent batteries should be disposed of by a qualified recycler or hazardous materials handler.

Cautions

MicroDock ll base station

  • If the base station is damaged or parts are missing, contact JJS Technical Services immediately
  • The base station must be used only in an area that is free of background gas. Do not use the base station in a hazardous area. Failure to adhere to this caution can lead to fire and/or explosion.
  • This equipment uses potentially harmful gas for calibrations. The base station must be attached to a venting system or be used in a well-ventilated area.
  • Perform calibrations and bump checks only in a clean atmosphere that is free of background gas.
  • The maximum recommended exhaust line length is 50 ft. (15.24 m).
  • Ensure that the inlet filter is clean.
  • Ensure that all gas cylinders contain enough gas.
  • Ensure the exhaust line is not connected to a negative pressure system.
  • A demand flow regulator must be used with all gas cylinder connections.
  • Do not expose the base station to electrical shock or severe continuous mechanical shock.
  • The base station warranty will be void if the unit is disassembled, adjusted, or serviced by non-JJS Technical Services personnel.
  • Do not immerse the base station in liquids.

GasAlertMicro, GasAlertMicro 5/PID/IR, GasAlertMicroClip, and GasAlertMax XT Chargers

  • If the charger is damaged or parts are missing, contact JJS Technical Services immediately.
  • Do not change or charge the batteries in a hazardous location. Do not use the charger in a hazardous location. Failure to adhere to these precautions can lead to fire and/or explosion.
  • Read and adhere to all instructions and precautions that are provided with the charger. Failure to do so can result in fire, electric shock, or other personal injury and/or property damage

Cautions

  • Use only JJS approved batteries; do not use alkaline or other rechargeable batteries with this charger.
  • For indoor use only.
  • Do not immerse the charger in liquids.
  • Do not expose the charger to electrical shock or severe continuous mechanical shock.
  • Ensure the detector battery pack is locked in place before operating the detector.
  • To eliminate the risk of electrical shock, disconnect and deactivate the charger when cleaning or performing maintenance.
  • Avoid touching the charger and detector contact pins.
  • Substitution of components may impair Intrinsic Safety of the detector under charge.
  • Do not charge the battery pack with any other charger.
  • Do not attempt to disassemble, adjust, or service the charger unless instructions are provided to perform a procedure, or a part is listed as a replacement part in the user manual. Use only JJS Technical Services replacement parts. Refer to Replacement Parts and Accessories.
  • The charger warranty will be void if a customer, personnel, or third parties damage the charger during repair attempts.
    Any non-JJS Technical Services by Honeywell service/repair attempts will void this warranty.

Table 1.International Symbols

Symbol Description
Approved to both U.S. and Canadian Standards by CSA International
Conforms to European Union Directives