Figure 14. Attaching the Wall Mounting Plate

Note

When mounting two or more docking modules, each docking module requires an individual set of wall mounting plates.
Because of the variety of surfaces that the base station can be mounted to, mounting screws are not provided.

Figure 15. Parts of the Wall Mounting Plate

Table 14. Mounting the MicroDock II

The base station and docking modules can be easily mounted to a secure surface. To mount the base station and docking modules, complete the following:
1. Determine a secure location to mount the base station
Using the screws that are provided, attach the wall mounting plates to the base station and docking modules.
2. When the plates are mounted on the base station, measure horizontally on the wall a distance of 2.38 in. (60.32 mm) for the base station width.
If mounting two or more docking modules that are attached on the wall, measure horizontally on the wall a distance of 1.64 in. (41.7 mm) of space between each docking module.
3. Use four screws to attach the base station to the secure surface.