Bump and Calibration Results

Bump and Calibration Results

The detector records the bump test and calibration results. The results can then be imported into Fleet Manager II to create detailed reports. The following information is recorded in the Bump/Calibration datalogs:

• Date/time bump tests and calibrations were performed
• Serial number of the detector
• Test performed
• Test results
• Detector user
• Supervisor
• Detector status
• Detector configuration updated during bump test/calibration
• Type of detector
• Location detector was used
• MicroDock II serial number
• MicroDock II location
• Last calibration performed
• Next calibration due date
• Last bump test performed
• Next bump test due date
• Datalog interval
• STEL period
• Pump enabled/disabled
• Audible and visual indicator status
• Sensor type and sensor status
• Alarm status
• Sensor status
• Inlet(s) used
• Definables (employee information)

Downloading Datalogs and Event Logs

The datalog and event log files can only be downloaded to a PC using the IR Link or the MicroDock II Base Station. Refer to the Fleet Manager II Operator’s Manual.

Software Requirements

Fleet Manager II and Excel software are required to create spreadsheet reports of the event logs, datalogs, and bump and calibration results.