- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Draeger
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- IGD
- mPower
- MSA
- RAE Instruments
- RKI Instruments
- WatchGas
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Troubleshooting
4.1 Troubleshooting
PROBLEM | DESCRIPTION | REACTION |
---|---|---|
ERROR TEMP | Temperature is below -40°F (-40°C) or above 167°F (75°C) |
Return to normal temperature range and recalibrate. Contact MSA |
ERROR EE | EEPROM Memory error | Contact MSA |
ERROR PRG | Flash Memory error | Contact MSA |
ERROR RAM | RAM Memory error | Contact MSA |
ERROR UNK | Unknown error | Contact MSA |
LOW BATTERY |
Battery warning repeats every 15 seconds |
Remove from service as soon as possible and recharge battery |
BATTERY ALARM |
Battery is completely discharged |
Instrument is no longer sensing gas. Remove from service and recharge battery |
ERROR CHARGE | Charge error | Instrument must be between 10 and 35°C to charge. Contact MSA if problem persists |
SENSOR ERROR | Missing Sensor | Verify sensor is properly installed and recalibrate. Contact MSA if problem persists |
Instrument does not turn ON | Low battery | Charge instrument |
![]() |
Sensor warning | Sensor is near its end of life |
![]() ![]() |
Sensor alarm | Sensor has reached end of life and cannot be calibrated. Replace sensor and recalibrate |