- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco Benchtop Conductivity Meter Kit - 3177MKA
Item #:
3177MKA
Brand:
Jenco
Share this product:
3177MKA Benchtop Conductivity Meter Kit by Jenco
The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.
- Renowned accuracy and repeatability
- Upgraded user experience and usability
- Low cost of ownership
The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco’s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.
Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability
The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.
- Repeatable readings with ±0.5% full scale accurate across entire measurement range
- Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
- Each and every unit is hand calibrated and QC'ed by at least 2 teams
- Simple one point calibration
Upgraded User Experience and Usability
While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.
- Streamlined, modern and smaller design creates clutter-free workspace
- Large, high contrast LCD
- Convenient one point calibration
- Automatically determines the best conductivity ranges to display readings
- Well-situated keys with tactile feedback
- Splash-resistant case made with durable, reinforced plastic for added protection
- AC adaptor or battery powered
Improved Electrode Serviceability and Low Cost of Ownership
The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.
- Splash-resistant case is made with durable, reinforced plastic for added protection
- 8-pin DIN connector for conductivity cell & 10k thermistor
- Optional, detached electrode arm
Kit Includes:
- 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
- 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
- 110/240VAC - 110 ~ 240V Power Adapter
- 007A - Alumimum Swing Arm
Conductivity/TDS Range K=0.1 | 0.00 to 200.0 μS/cm / 0.00 to 200.0 mg/L |
Conductivity/TDS Resolution K=0.1 | 0.01 μS/cm, 0.1 μS/cm / 0.01 mg/L, 0.1 mg/L |
Conductivity/TDS Accuracy K=0.1 | ±0.5% F.S. |
Conductivity/TDS Range K=0.475 | 0.0 μS/cm to 200.0 mS/cm / 0.0 mg/L to 200.0 g/L |
Conductivity/TDS Resolution K=0.475 | 0.1 μS/cm, 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm / 0.1 mg/L, 1 mg/L, 0.01 g/L, 0.1 g/L |
Conductivity/TDS Accuracy K=0.475 | ± 0.5% F.S. |
Salinity Range | 0.0 to 80.0 ppt |
Salinity Resolution | 0.1 ppt |
Salinity Accuracy | ± 0.5% F.S. |
Temperature Range | 0.0 to 100.0 °C |
Temperature Resolution | 0.1 °C |
Temperature Accuracy | ±0.2 °C |
Reference Temperature | 15.0 to 25.0 °C, default at 25.0 °C |
Temperature Coefficient | 0.00 to 4.00%, default at 1.91% |
TDS Factor | 0.30 to 1.00, default at 0.65 |
Basic Cell Constant | K=0.1 or K=0.475, user selectable |
Power Supply | 100 to 240 V AC adapter or AAA x 6 Batteries |
Calibration Backup | Yes |
Audio Feedback | All touch keys |
Data Memory | 750 sets |
Auto Ranging | Yes |
Ambient Temperature Range | 0 to 50 °C |
ATC Probe | Thermistor, 10k ohm |
Dimensions (w x d x h ) | 150 x 210 x 45 mm |
Weight | 504 grams (excluding batteries) |