- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Honeywell Analytics IR-148 Infrared Gas Monitor, Four Point, NF3 (0-100 ppm) - 1324-0044
Item #:
1324-0044
Brand:
Honeywell Analytics
Share this product:
1324-0044 IR-148 Infrared Gas Monitor, Four Point, NF3 (0-100 ppm) by Honeywell Analytics
The Model IR-148 is an infrared gas monitor that detects toxic and combustible gases as well as solvents. It uses infrared sensing technology, allowing accurate measurement of target gas vapors with minimum interference from other vapors. The Model IR-148 is supplied as a wall mount unit configured for 1, 4 or 8 sampling points measuring down to 1 part per million (ppm). It has two available analog outputs, each which is software selectable between 10% and 100% of full scale: 4-20mA, isolated, current sourcing, and 0-10 VDC. Multiple gas calibrations are available.
Additional Features and Benefits:
- Infrared sensing technology
- Accurate measurement of target gas vapors with minimum interference
- Optional relay module can be configured for 1, 2 or 3 alarm levels
- 4-20mA
Quick Specs:
- Response: Updated reading every 7 seconds
- Operating temperature: 0-50°C, 32-122°F
- Relative humidity: 0-99% non-condensing (no effect on reading)
General Specification | |
Typical | Performance characteristics subject to change, depending on gas to be monitored and full-scale range. |
For 0-1000ppm Range | Accuracy: 0-100ppm ±2ppm; 100-1000ppm ±10% reading Linearity: 0-100ppm linear, 100-1000 ±2% of full scale Sensitivity: 2ppm Resolution: 1ppm |
Note | Specifications for other ranges dependant on application. Consult factory. |
Reproducibility | ±2ppm over 12 months at specified operating conditions |
Response | Updated reading every 7 seconds |
Operating Temperature | 0-50°C, 32-122°F |
Temperature Effect | ±0.3% per °C of reading |
Relative Humidity | 0-99% non-condensing - no effect on reading |
Sample Flow Rate | 1.5 liter/minute |
Maximum Total Tubing Length | 150f with 1 /8" ID 500f with 3 /16" ID |
Operating Power Requirements | 120VAC ± 10% at 0.56A, or 240VAC; ±10% at 0.3A |
Alarm Relays | 3 relays @ 8A resistive |
Approvals | CE approval: EN55011 & EN 50082-2/EN6100-4-2 |
Outputs | Analog 4-20mA sourcing (dependent on configuration) RS23C (standard), RS422 or RS485 (optional module) |
Physical Enclosure Information | |
NEMA 4 | Dimensions: 460 x 410 x 180mm (18" x 16" x 7") (H x W x D) Weight: 19kg (40lbs) |
19" Rack Mount | Dimensions: 180 x 450 x 390mm (7" x 175 /8" x 151 /4") (H x W x D) Weight: 9kg (19lbs) |