BW Technologies Integral Motorized Pump (Generation 2) Kit with Visible Integrated Filter, Yellow

You don't need to remove the pump. Turn the regulator on and use the quick-connect (M0931K) to connect the gas to the meter. It will alarm very quickly and pass the bump test. If you are using the MicroDock, you can remove the pump or remove the insert in the Micro 5 bay. If you remove the insert, it just snaps out. If you remove the pump, take the top two screws out of the back of the meter and pull the pump off. This method, you will have to replace it with the diffusion cover before doing the bump test.