GasMan single gas monitor

Description

Single Gas

Available for the following gases:

O2, Co, H2S, SO2, CL2, NH3, O3, NO2, HCN, F2, HF, PH3, NO, HCL, ETO
The new Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments. Featuring simple one button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.

Versions available for combustible gas, oxygen and toxic gases
Rechargeable versions for all gas types
Non rechargeable versions for oxygen and toxic gases
Ultra lightweight – just 80g for toxic versions
Loud 95dBA audible alarm
Dual colour visual alarm, red blue twin flashing LEDs
Vibrating alarm
IP65 and IP67 ingress protection
Real time TWA and Peak display options
Optional datalogging

Specifications

Specifications

Weight	130g flammable 95g oxygen 80g toxic
Dimensions	90x48x24mm (3.5x1.9x0.95inch) HxWxD
Available Gases and ranges	Flammable 0-100% LEL 20% LEL 10% LEL Oxygen 0-25% 19.5/23.5% 19.5% Hydrogen Sulphide 0-50ppm 5ppm 10ppm Carbon Monoxide 0-500ppm 30ppm 35ppm Sulphur Dioxide 0-10ppm 1ppm 2ppm Chlorine 0-5ppm 0.5ppm 0.5ppm Nitrogen Dioxide 0-10ppm 1ppm 3ppm Ammonia 0-50ppm 25ppm 25ppm Ozone 0-1ppm 0,1.ppm 0.1ppm Hydrogen 0-1000ppm N/A N/A Hydrogen Cyanide 0-25ppm 5ppm 5ppm Hydrogen Chloride 0-10ppm 1ppm 1ppm Hydrogen Fluoride 0-10ppm 5ppm 5ppm Phosphine 0-5ppm 0.2ppm 0.2ppm Fluorine 0-1ppm 0.1ppm 0.1ppm Ethylene Oxide 0-10ppm 5ppm 5ppm Nitric Oxide 0-100ppm 25ppm 50ppm Other ranges and alarm levels are available on request. Each unit can have two instantaneous alarms levels set. Toxic units also have Time Weighted Average alarms. Flammable gas calibration is available for methane, propane, butane, pentane, hydrogen and ethylene as standard.
Typical response times	Flammable 20s, Toxic gas 20s, Oxygen 10s
Audible Alarms	95dBA
Visible Alarms	Dual colour red/blue flashing LEDs in gas hazard
Vibrating Alarm	Internal vibrating alarm
Display	Custom LCD with backlight, with display of gas
Display Mode	Normal display for real time gas concentration levels.
Display recall	for Peak readings and TWA.
Datalogging	Full timed datalogging with adjustable sample rate, set to 1 minute data rate. 900 hours storage at 1 minute interval. >4800 capacity event logging to record all instrument events including: Switch on/off, Battery status, Alarms activate/clear including peak values of response, Gas Test pass or fail. All events are time stamped