Replacement Parts, Batteries, Fuses

AOXP2 Manual Flue Pump with Trap by Fieldpiece

The AOXP2 Manual Flue Pump with Trap is included with our AOX2 Combustion Check Accessory Head. Features a water and contaminant trap to help maximize sensor life. A newly designed bulb stands up to the rigors of flue testing and manual pumps work better in cold weather than electronic pumps.

ASP2 Static Pressure Probes by Fieldpiece

The ASP2 Static Pressure Probe two-pack makes taking static pressure measurements in duct work easier, faster and more accurate than using manometer tubes alone. Features a magnetic flange and directional arrow for hands free use and to ensure proper positioning and optimal performance. Works with all Fieldpiece manometers.

RAOX9 Replacement Parts Bag for AOXP2 by Fieldpiece

Maximize the sensor life on your Fieldpiece combustion testing equipment. Change the water trap filters and O-rings when you see signs of wear to keep your meter sensors clean and contaminant free. The RAOX9 comes with replacement water traps, O-rings and replacement thermocouple clips.

RCA2 Car Charger for SRL2K7 and SRL8 by Fieldpiece

With all the chargers and plugs you have in your service van, one is bound to get left behind, borrowed indefinitely by a co-worker or lost. Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RCA2 will keep you in business when you're on the road. Powers models SRL2K7 and SRL8 while charging.

RCBLDL5 Replacement USB Cable for DL2 and DL3 by Fieldpiece

The RCBLDL5 is a replacement cable for Fieldpiece data logger models DL2 (USB model) and DL3. Get an extra and keep one in the service vehicle and one in the office.

ACM4/SCM4 CO Sensor

Cone Lock (In-duct)

RCONE2 Cone Lock (SOX3) by Fieldpiece

The RCONE is designed to hold the barrel of the SOX3 Combustion Checker firmly in the flue. It's great for hands free testing, and the threading makes it easy to tighten the stabilizing cone in place.

RCR2032 Battery Replacement for SIR2, SC52, SC53 by Fieldpiece

When you're at the distributor this is the battery about the size of a nickel. It powers the SIR2, SC53 and SC53. Don't get caught without the power you need when you're on a call, keep an extra one or two RCR2032's in your bag to make your job easier, faster and better.

Molex Probe Tips

RF16 Fuse 4-pack for LT17 and LT16 by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT17 and LT16.

RFE2 9-inch Flexible Leak Detector Wand Extension by Fieldpiece

This wand connects to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

RFL2 Replacement Filters and O-rings for Fieldpiece Refrigerant Leak Detectors by Fieldpiece

Fieldpiece filters and O-rings are designed to help protect your refrigerant leak detector sensor and keep it working properly. When the filter swells up and blocks water and other contaminants from reaching the sensor, it's done its job, and it's time for a replacement. You'll find the RFL2 Replacement Filter and O-ring pack at your favorite Fieldpiece distributor.

RFL712 Fuse for HB74 by Fieldpiece

Replace a blown fuse on Fieldpiece HVAC/R multimeter model HB74.

RFL83 Fuse 4-pack for LT83 and LT83A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 after serial number 120808 and model LT83A before serial number 70003091.

RFL83A Fuse 4-pack for LT83A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83A after serial number 70003091.

RFM66 Fuse 4-pack for SC66/67/76, HS 35/36, LT17A, and LT19A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter models SC6X-76, HS35-36, LT17A and LT16A.

RFM70 Fuse 4-pack for LT16 and LT16A by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT16 and LT16A.

RFM74 Fuse 4-pack for LT83, LT83A, LT17 and HB74 by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT83, LT83A, LT17 and HB74.

RFS74 Fuse 5-pack for LT83 by Fieldpiece

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 before serial number 120808.

RHD1 Replacement Heated Diode Refrigerant Sensor for SRL8 by Fieldpiece

Although our heated diode refrigerant leak detector sensor is designed to last up to five years with normal use, our meters generally last a lot longer. This replacement sensor is for the Fieldpiece Heated Diode Refrigerant Leak Detector, model SRL8 and is available from your favorite Fieldpiece distributor.

RL736 3-pack Battery Replacement for PLM2 by Fieldpiece

The Fieldpiece Lighted Extension Mirror model PLM2 takes three model RL736 batteries to shine light where you need it when you need it. Keep a set in your service bag so that you can read part numbers in dark places. About 2/3 the size of a dime.

Bat-Replaceable Leak Detector

RLR44 2-pack Battery Replacement for SPK1, SWT2, SIL2, SIP2 by Fieldpiece

These batteries power several Fieldpiece thermometers. From our probe style portables to our infrared models, keep an extra pack in your service bag to make your job easier, better and faster. About the size of a small button.

RMA316 Manometer Tube Adapter 3/16" to 5/16" by Fieldpiece

The RMA316 adapter tubes are designed to work with with Fieldpiece manometers to take the manometer tubes from 3/16" to 5/16" to fit inlet and outlet valves on various models of gas appliances.

RRE2 9-inch Rigid Leak Detector Wand Extension by Fieldpiece

Connect this rigid wand to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places. A great tool for testing A-coils and seals. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

RREF16 Replacement Reflective Tage for SR by Fieldpiece

The RREF16 replacement reflective tape pack works with our Optical Laser Tachometer model SRMP2. Use according to refector instructions found in the SRMP2 operator's manual.

RSMANK6 Valve and Knob Kit by Fieldpiece

The RSMANK6 is a replacement valve and knob kit for the SMAN2 and SMAN3 Digital Manifolds.

RSO2 Field-replaceable Oxygen Sensor for SOX3 by Fieldpiece

The SOX3 uses an oxygen smart sensor. The icon indicates the approximate life remaining on the sensor and when the indicator is empty, it's time to replace sensor. Techs no longer have to send their instruments in for calibration because the oxygen sensor simply twists in and out.

RSOX3 Barrel, Handle, Thermocouple and Hose for SOX3 by Fieldpiece

The RSOX3 comes with the SOX3, but if it's lost, it can be replaced. The RSOX3 consists of an 8-foot dual-channel hose, barrel, handle and thermocouple.

RWA2 Wall Charger for SRL2K7 and SRL8 by Fieldpiece

Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RWA2 works with both the SRL2K7 and SRL8. Keep one in the office and one in your service bag because Fieldpiece leak detectors are operational while charging.

Part-Manometer Tube(x2)

Part-Manometer Tip(x2)

Part-SDP2 Probe (x1)

Part-SMAN4 Valve Kit

Part-SRS2C Remote

Scale-SRS3 Remote

T/C-Clamp (3/8 - 1 3/8")

ATRAP2 Replacement AOXP2 Water Trap by Fieldpiece

While our hand pump is built to last for years, a mishap can ruin your work day. We've got you covered with this replacement water trap. The ATRAP2 is the whole water trap replacement assembly for our manual hand pump model AOXP2. Plan ahead and keep an extra one in your bag.

Wall Charger for SRL2

MG44 Replacement Coupler

Part-DR58,DR82 AC/USB-C Charger

Part-DR58/DR82 Filter Tips (x5)

Part-DR58 Flex Wand

Part-DR82 Flex Wand

TC48 Large Pipe Clamp by Fieldpiece

Use your new TC48 Large Pipe Clamp Type K Thermocouple to take temperatures of pipes or any electrically conductive cylindrical surface measuring between 3/4" to 4 1/8" in diameter.

The reach of this clamp's jaws covers most sizes seen in residential and commercial systems. The clamp's design enables a quick setup onto the line set with a single-handed operation.

The patented Rapid Rail™ sensor is specifically designed for pipe readings. Readings are extremely fast and accurate. Easily measure the temperature of pipes that are affixed to walls or other surfaces, regardless of angle. Connect your TC48 to a thermometer with a compatible Type K thermocouple mini jack.

• Works on pipes between 3/4" to 4 1/8"
• Perfect for commercial and refrigeration applications
• Single-hand operation
• Extremely accurate and quick
• Compact design
• Comfortable, ergonomic grip
• Rapid Rail™ Sensor Technology measures temperatures fast

Bigger and more accurate.

If you need to measure the temperatures on larger pipes, pick up a TC48 Large Pipe Clamp. It uses Rapid Rail™ Sensor Technology to measure temperatures fast – in an instant. It's unaffected by ambient air, wind, or moisture on the pipe. Measuring a whopping 4 1/8", the TC48 is the biggest pipe clamp on the market, making it the ideal fit for commercial and refrigeration jobs.

But not too big.

We designed the TC48 to be easily used with one hand – that comes in handy for pipes that are hard to reach. Plus, with an extra-long six-foot cord, there’s no more crouching and squatting while taking pipe temperatures.

The TC48 features:

• Electrically conductive pipe contact surface compatibility
• Jaw range between 3/4" to 4 1/8" pipe diameter
• Rapid Rail™ Sensor Technology thermocouple (nickel chromium / nickel aluminum)
• Type-K male mini plug for a universal fit
• Measurement Range: -50°F to 257°F (-46°C to 125°C)
• Stabilizes in seconds
• ±1.0°F (±0.6°C) after field calibration
• Waterproof, rugged, and built to withstand the rigors of field use
• Meets California’s Title 24 requirements

What's Included:

• (1) TC48 Large Pipe-Clamp Thermocouple
• (1) Emery Cloth for Cleaning Pipes